How to Apply Window Stickers from the Inside

  1. How to Apply Window Stickers from the Inside

    1. Clean the Window
      Thoroughly clean the interior side of the window where you'll apply the sticker. Ensure it's free from dirt, dust, and grease.

    2. Prepare the Sticker
      Carefully remove the backing paper from the sticker, exposing the adhesive side.

    3. Spray Water Solution
      Lightly spray a mixture of water and a drop of dish soap on the adhesive side of the sticker. This helps with positioning and prevents immediate sticking.

    4. Position the Sticker
      Place the sticker on the inside of the window, with the design facing outwards. The adhesive side should be against the glass.

    5. Adjust and Smooth
      Gently adjust the sticker to the desired position. Use a squeegee or credit card to smooth out the sticker from the center outwards, removing air bubbles and excess water.

    6. Remove Excess Water
      Use a clean, lint-free cloth to absorb any excess water around the edges of the sticker.

    7. Allow to Dry
      Let the sticker dry completely for 24-48 hours before exposing it to moisture or extreme temperatures.

    8. Final Check
      Once dry, check for any remaining air bubbles and smooth them out if necessary.

    Remember, inside window stickers are designed to be read from the outside, so make sure your design is reversed when applying from the inside.